Combination Pleating Line

Double Hot-melt type

  • Reciprocate Pleater cannot pleat HEPA, ULPA material and a HEPA Pleater cannot pleat Synthetic, PTFE material. Therefore, when you want to pleating Synthetic or PTFE material with spraying hot melt, using Reciprocate Pleater is first, and then using HEPA Pleater second.
  • It installed two kinds of hot-melt (EVA &Polyamide) system, so if necessary, you can choose one.
Spec. model DBCP – W1300TSD DBCP – W1600TSD
production capacity 100pleat/Min/Max:synthetic media 80pleat/Min/Max:synthetic media
18meter/Min/Max:Fiber Glass media 18meter/Min/Max:Fiber Glass media
Available Widh 1250mm/Max 1550mm/Max
Available Height 15mm-100mm/Max:Synthetic media 10mm-60mm/Max:Synthetic media
20mm-100mm/Max:Fiber Glass media 30mm-100mm/Max:Fiber Glass media
Electric Power 380V/220V * 60(50)HZ * 3P(4P) 380V/220V * 60(50)HZ * 3P(4P)
Hot-melt Application System Main Motor :220V*3P*1/2HP Main Motor :220V*3P*1/2HP
Tank Volume :60kg*2 units * 2 Grade Glue (TTL 4 units) Tank Volume :60kg*2 units * 2 Grade Glue (TTL 4 units)
Melting Capacity : 66kg/Hr/Max Melting Capacity : 66kg/Hr/Max
Hose Quantity 8 Units * 2 Grade Glue (TTL 16 units) Hose Quantity 8 Units* 2 Grade Glue (TTL 16 units)
Auto Gun Sol V/V : DC24V Auto Gun Sol V/V : DC24V
Multi Head of Module Quantity: 200sets Multi Head of Module Quantity: 248sets
Temperature control : 230 ℃/MAX Temperature control : 230 ℃/MAX
Type of Pump Gear pump Type of Pump Gear pump
Quantity of Pump 2 unit/Tank=2units Quantity of Pump 2 system/tank
RECIPROCATE PLEAETER, Un-winder & Slitter, HEPA PLEATER
RECIPROCATE PLEAETER Un-winder & Slitter HEPA PLEATER
  • 1. That applies to all industries and in almost filter can be pleat equipment. Due to pleating by four cams, it can pleat normal filter, several layers filter, AL, Steel Mesh.
     Use for Media : Paper, Mesh, Non Woven Cloth, Electronic Media, Synthetic Media, PTFE Media
  • 2. Minimize the friction by Teflon Coating
  • 3. The post heating intervals is 500mm. It has been increased the time and space. So it has been improved the quality of production.
     Input Heater System of Heating Length: 250mm. Outlet Heater System of Heating Length: 500mm.
  • 4. Automatic setting function for pleating height.
  • 5. Can pleating W-TYPE. (Special Feature)
  • 6. ION BLOWER installation (Minimize the static buildup between a reciprocate pleater and the material.)
  • 7. Safety Guard system of Door and Cover
  • 8. Touch Screen Controller
  • 9. Production Speed Control : Inverter
  • 10. Heater System : When the temperature goes up or down above ±2 degrees than the set temperature, the power is cut off.
  • 11. Marking system : On the top of the outlet part.
  • 12. Individual use is also available.
  • 13. Blade Stop : It was designed to stop when the lower blade reaches to the rising point.
  • 1.Media Change : Lift system
  • 2.Media holding : 3 inch Air Expansion Shaft
  • 3.Media Tension Control : Powder Brake system
  • 4.Media feeding speed control : Inverter
  • 5.Fiber Sensor
  • 6.The upper feed roller: Rubber coating
  • 7.Cutter : 4 sets
  • 8.Slit Cutter : Air cylinder type.
  • 9.Electric Power : 380V/220V * 60HZ *3P
  • 10.Motor drive capacity : 0.40kW
  • 11.Use the media:
    * Width - 650, 950, 1250, 1550mm
    * Out Diameter - 1000mm / Max.
    * Weight – 150kg / Max.
  • 1. HEPA Pleater use Hot-melt adhesive while it pleat. Depending on the amount of hot-melt, can increase or decrease the pitch of pleated.
  • 2. Development of a variety of hot melt spraying method. (5 kinds of hot melt spraying method)
  • 3. It can control to height through the input values without exchange the roller.
  • 4. Automatic height adjustment of the outlet conveyor can be set up through the numeric input.( When pleating height is adjusted, can be adjusted simultaneously.)
  • 5. In order to increase a worker's convenience, installed a moving remote operating panel.
  • 6. Media Change : Lift system.
  • 7. Media holding : 3 inch Air Expansion Shaft.
  • 8. Media Tension Control : Powder Brake system
  • 9. Slit Cutter : Air cylinder type
  • 10. Cutter : 4 sets
  • 11. Use the media: ULPA, HEPA, Medium
  • 12. Module Assembly : Each conrol.
  • 13. Hot-melt pitch : 25.0mm (1 inch 25.4mm – Option)
  • 14. Both sides Melting system..
  • 15. Media feeding control : Fiber Sensor
  • 16. Air Cooling Pressure Control : Inverter system
  • 17. Idle Roller : Teflon Coating
  • 18. Safety Guard system of Door and Cover
  • 19. Color Sensor : Hot-melt position Control – Synthetic, PTFE Media
  • 20. Touch Screen Controller

Resource Download

Reading and downloading of
this document is a DOUBLEWIN
members only.

Product PDF Download
  • Combination pleating line 2012

Please refer to the attached information, it will help your choice

  • 1. It is a compressed file. Please create a folder where to save first , and unzipped it.
  • 2. All files must be stored in one folder, otherwise you cannot view the file correctly.
  • 3. Starting on page 11, black box is shown. Please click inside the black box, you can see the video.