Combination Pleating Line

Foam-melt type

  • Reciprocate Pleater cannot pleat HEPA, ULPA material and a HEPA Pleater cannot pleat Synthetic, PTFE material. Therefore, when you want to pleating Synthetic or PTFE material with spraying hot melt, using Reciprocate Pleater is first, and then using HEPA Pleater second.
  • Using FOAM type hot melt glue, Reducing the weight of the filter, simultaneously cost saving effect of over 50% hot melt adhesives. It Can be changed to General type.
 
Spec. model DBCP – W1300NCF
production capacity 100pleat/Min/Max:synthetic and PTFE media
Available Width 1250mm/Max
Available Height 7mm-95mm/Max: Reciprocate pleating M/C
15mm-95mm/Max: HEPA pleating M/C
Electric Power 380V/220V * 60(50)HZ * 3P(4P)
Hot-melt Application System
*Foam type
 
Main Motor : 380V * 4P * Servo motor
Tank Volume : 30kg*2 unit
Melting Capacity : 30kg/Hr/Max
Hose Quantity : 6 Sets
Auto Gun Sol V/V : DC24V
Multi Head of Module Quantity: 90 sets (Possible 100sets)
Temperature control : 230 ℃/MAX
Use for level sensor Glue volume
Use for gas "N" Gas
RECIPROCATE PLEAETER, Un-winder & Slitter, HEPA PLEATER
RECIPROCATE PLEAETER Un-winder & Slitter HEPA PLEATER
  • 1. Use for Media: Paper, Mesh,
    Non Woven Cloth, Electronic Media,
    Synthetic Media, PTFE Media
  • 2. Minimize the friction by hard CR coating.
      Pleating blade and Upper/lower heating plate.
  • 3. Input Heater System of Heating Length : 250mm
  • 4. Outlet Heater System of Heating Length : 500mm
  • 5. Automatic setting function for pleating height
  • 6. ION BLOWER installation (Minimize the static buildup between a reciprocate pleater and the material.)
  • 7. Safety Guard system of Door and Cover
  • 8. Production Speed Control : Inverter
  • 9. Touch Screen Controller
  • 1.Media Change : Lift system
  • 2.Media holding : 3 inch Air Expansion Shaft
  • 3.Media Tension Control : Powder Brake system
  • 4.Media feeding speed control : Fiber Sensor
  • 5.Cutter : Adjustable
  • 6.Slit Cutter : Air cylinder type
  • 7.Electric Power : 380V/220V * 60HZ *3P
  • 8.Motor drive capacity : 0.40kW
  • 9.Use the media:
    * Width - 1250mm
    * Out Diameter - 1000mm / Maximum
    * Weight – 150kg / Maximum
  • 1. Development of a variety of hot melt discharging method. (5 kinds)
  • 2. It can control to height through the input values without exchange the roller.
  • 3. Automatic height adjustment of the outlet conveyor can be set up through the numeric input.( When pleating height is adjusted, can be adjusted simultaneously.)
  • 4. In order to increase a worker's convenience, installed a moving remote operating panel.
  • 5. Media Change : Lift system.
  • 6. Media holding : 3 inch Air Expansion Shaft.
  • 7. Media Tension Control : Powder Brake system
  • 8. Slit Cutter : Air cylinder type
  • 9. Module Assembly : Each conrol.
  • 10. Hot-melt pitch : 25.0mm (1 inch 25.4mm – Option)
  • 11. Both sides Melting system.
  • 12. Media feeding control : Fiber Sensor
  • 13. Air Cooling Pressure Control : Inverter system
  • 14. Idle Roller : Teflon Coating
  • 15. Safety Guard system of Door and Cover
  • 16. Foam type hot-melt applicator system
  • 17. Touch Screen Controller
  • 18. Urethane Belt Conveyor : w1300mm * L2000mm




Resource Download

Reading and downloading of
this document is a DOUBLEWIN
members only.

Product PDF Download
  • Combination pleating line_Foam type

Please refer to the attached information, it will help your choice

  • 1. It is a compressed file. Please create a folder where to save first , and unzipped it.
  • 2. All files must be stored in one folder, otherwise you cannot view the file correctly.
  • 3. Starting on page 11, black box is shown. Please click inside the black box, you can see the video.